Site map
About Smartec | Documentation | FAQ | Where to buy
The Art of CCTV
For example, ip camera  
Where to buy
E-mail: info@smartec-security.eu

Catalog

STC-IPX3562A Day/Night network video cameras with WDR, 3 codecs, IP66 and audio channels

STC-IPX3562A Day/Night network video cameras
  • 1/3” Sony Double Scan CCD
  • DaVinchi next-gen processor
  • 2.8-10.5 mm built-in varifocal lens with AI
  • Н.264, M-JPEG/MPEG-4 support
  • VCA video analytics
  • Resolution from CIF to Full D1, 25 fps recording speed
  • WDR wide dynamic range
  • IP66 vandalproof housing
  • 2-way audio communication
  • Alarm input/output
  • Built-in motion detection
  • Day/Night software function

Smartec NEYRO Series IP video cameras use DaVinci DSP-processor and VCA video analytics, and provide network video surveillance with intelligent analytical image processing inside of the camera. STC-IPX3562A is bundled with VCA Presence package with the possibility to buy optional VCA Surveillance package, featuring an extensive set of algorithms for video analytics. In addition, network video cameras can be used in difficult lighting conditions and has vandal-proof aluminum housing with IP66 protection rate.

Dual-stream video transmission with Full D1 resolution at 25 fps
STC-IPX3562A can transmit over the network two video streams simultaneously with different compression, resolution and frame rate. Using H.264, MPEG-4 and M-JPEG video codecs, network video cameras can transmit video with Full D1 (720x596 pix.) resolution at up to 25 fps. In addition, each NEYRO Series video camera provides different image settings, which can be configured over the network.

Digital image stabilization and an effective noise reduction
Digital Image Stabilization (DIS) processing technology allows STC-IPX3562A to stabilize video and avoid image jitter in case of camera vibration. In addition, network video cameras use digital noise reduction function, which reduces noise and provides high quality images when operating in low light conditions. This function also saves up to 70% of DVR disk space for storing more information from various network devices.

Sony Double Scan CCD with wide dynamic range
In WDR mode, each NEYRO Series video camera transmits high-quality image on the application with the contrast light conditions. Using progressive dual-scan CCD, these network video cameras generate pre-frame with normal exposure and then secondary frame with low exposure. After that, video camera performs its integration to create a full frame with normal image contrast.

Video analysis in STC-IPX3562A
When activated, VCA Presence video analytics allows network video cameras to transmit information about moving objects in the monitoring area, carry out simultaneous tracking of multiple objects (up to 100), set detection zones and control camera operation. Optional VCA Surveillance package provides an advanced image analysis. It performs the classification of objects by size (people, cars, etc.), tracks the direction of moving objects, analyzes temporary objects’ stay in the restricted area, counts the number of people, carries out detection of missing items and etc.

Software for configuration, recording and viewing video over the network
STC-IPX3562A can be connected directly to Ethernet network of current video surveillance system with the possibility to configure its setting over the network, using standard web browser. To deploy large network video systems, based on the Smartec network cameras and video servers, it is recommended to use Milestone XProtect professional software. This software allows the operator to view and record video/audio, use interactive graphics and create eMap plans. In addition, NEYRO Series network video cameras can be used with third-party software, like Mitsubishi NetHunter.

Extension of the functionality and overall operation
STC-IPX3562A has a microSD memory slot and USB 2.0 port for connecting external security devices. Recording to a memory card can be carried out in a constant mode or by event (alarm signal, disconnection, etc.). At the same time, each network video camera supports 2-way audio transmission (with connected microphone and speaker). Due to alarm I/O, these network devices can be connected to an external executive devices or security sensor.

Easy installation
Due to 3-axis mounting bracket, network video cameras can be easily configured on the application: the operator can rotate the module up to 180°/90°. Depending on the architecture of the object, vandalproof video cameras can be installed on the horizontal and vertical surfaces with power supply over Power-over-Ethernet technology or 12 VDC.

Specifications of the Smartec STC-IPX3562A network video cameras 

Model:

STC-IPX3562А

Camera Type:

Network; Day/Night, IR cut Filter

Image Sensor:

1/3" Sony CCD

Horizontal Resolution:

Color: 560 TVL;

B/W: 600 TVL

Pixels:

795х596

Video Compression:

H.264, MPEG-4, M-JPEG

Resolution:

D1, 4CIF, VGA, CIF, QCIF

Frame Rate:

25 fps (D1)

Audio Compression:

G.711(μLaw, aLaw), PCM

Minimum Scene Illumination:

Color: 0.3 lux (F1.2);

B/W: 0.03 lux (F1.2);

0.002 lux (with Sense-Up frame accumulation mode)

Electronic Shutter:

1/50-1/120 000 sec

х256 – 1/50 – 1/120 000 sec

Frame accumulation mode can’t be configured

Dynamic Range:

54 dB (х128)

S/N Ration:

52 dB (AGC OFF)

Image Settings:

Auto White Balance, AGC, backlight compensation, flicker compensation, digital stabilization, digital noise reduction

Video Camera Lens:

Built-in varifocal lens with2.8-10.5 mm and AI

Viewing Directions:

Pan: ± 180°; Tilt: 0-90°

Audio Input:

Linear, 1.43 V (min. 1.35 V, max. 1.49 V), 39 kOhms

Audio Output:

Linear, 46 mW, 16 Ohms

Video Output:

CVBS, 1V, 75 Ohms, BNC

Network:

Ethernet 10/100Base-T

Network Protocols:

TCP/IP, UDP/IP, HTTP, RTSP, RTCP, RTP/UDP, RTP/TCP, SNTP, mDNS, UPnP, SMTP,

SOCK, IGMP, DHCP, FTP, DDNS, SSL v2/v3, IEEE 802.1X, SSH

Video Streams:

Two configurable video streams

Synchronization:

Internal

Motion Detection:

8 zones

Masking Zones:

8 zones

Video Analytics:

VCA Presence (supplied), VCA Surveillance (optional)

Software:

NetStation (supplied) or NetHunter (optional)

Memory Slots:

MicroSD memory slot (not supplied)

Alarm Interface:

1 video input (TTL, 4.5 V, max. 50 mA)/

1 video output (max. 500 mA, 24 V DC or 1A, 12 V AC)

Ports:

RS-485 and USB for external devices

Input Voltage:

PoE (IEEE802.3af, 0 Class);

12 V DC (adapter supplied)

Power Consumption:

7.4 Wt

Operating Temperatures:

 –10 °C to +50 °С

Protection Rate:

IP66

Housing:

Solid Aluminum

Color:

White

Dimensions:

Housing: 150.8 × 113 mm; Dome: 100 mm

Weight:

1080 g

 

Copyright Smartec 2006-2017