Site map
About Smartec | Documentation | FAQ | Where to buy
The Art of CCTV
For example, ip camera  
Where to buy


17” LCD Monitor STM-170 with 4:3 aspect ratio

Smartec STM-170
  • Rugged metal casing
  • HDMI and VGA inputs
  • 700 TVL resolution (BNC input)
  • SXGA resolution (HDMI / VGA)
  • On-screen menus for adjusting monitor settings
  • Two loop-through video inputs (BNC)
  • S-video input
  • Brightness of 250 cd/m2; Contrast Ratio of up to 1000:1
  • Fast response time
  • Noise reduction
  • Adjustable display modes for dynamic and static video
  • Scratch-proof antiglare protective glass
  • Long-life backlight lamps
  • Audio input

STM-170 monitors have aspect ratio of 4:3. Slim design and thin screen frame provide maximum space saving. With optional mounts you can install the LCD monitor on a desk or wall.

Dynamic Image Without Smear
The STM-170 monitors offer high contrast ratio which ensures enhanced picture detail. The LCD monitors deliver high quality dynamic video. The STM-170 provides accurate color rendering including dark colors, and allow an operator to see detailed picture even under bright light. The STM-170 has horizontal viewing angle of 160°. Maximum brightness is 250 cd/m2.

Operator can adjust brightness and contrast levels as well as many other settings using user-friendly on-screen menus. 

Noise reduction feature is useful to remove image noise when viewing video from cameras in low light environment.

HDMI Input
Using HDMI interface, a DVR with a corresponding output can be connected to the monitor. It is especially useful for viewing live or recorded video from cameras with D1 resolution in multiscreen mode, as this allows to get the best possible picture quality in each of the screens. Since there is no digital-to-analog conversion, multiscreen image transmitted from a DVR via HDMI interface is of higher quality, than when VGA connection is used. HDMI interface also allows to transmit audio signal from a DVR together with video signal using the same cable.

Easy installation
For easy installation, fourmounting holes are provided in the corners of the LCD monitors .There are four VESA-compliant (75 mm) mounting holes in the center of the monitor's back panel, allowing to use both Smartec and third-party brackets and mounts. You can mount the STM-170 on the wall, or with optional STB-M1X stand, place it on your desk like an ordinary monitor.

Specifications of the Smartec STM-170 



Diagonal size:



1280x1024, RGB

Pixel Pitch:

0.264x0.264 mm

Resolution (BNC input):

700 TVL

Color Depth:

8 bit, 16.7 mln. colors


250 cd/m2

Contrast Ratio:


Viewing Angle (L/R/U/D):


Light Source Type/ Life

4CCFL/50 000 h

Response Time:

5 ms


Video Standard:


Scanning Type:

Digital progressive scanning

Video Inputs:

Composite: 2xBNC, 1 Vp-p, 75 Ohms, loop-through; 1xS-Video: 4-pin Mini-Din, brightness: 0.7 V / color: 0.3 V, 75 Ohms


75 Ohms, Auto

Audio Input:

2xRCA (stereo)

Audio Output:



Input signal:

Analog RGB (0.714 V, 75 Ohms), vertical and horizontal synchronization; digital HDMI


15-pin D-Sub, HDMI


VGA: 640x480 / 60-75 Hz; SVGA: 800x600 / 56-75 Hz; XGA: 1024x768 /60-75 Hz SXGA: 1280x1024/60 Hz




Brightness, Contrast, Hue, Color, Sharpness, Dynamic image optimization, Noise reduction

Input Voltage:

12 VDC + 5%

Power Consumption:

41 W (max.)

Power Jack:

5.5/2.1 mm

Dimensions (LxHxD):

398x334x49.5 mm


4 kg

Operating Temperature:

0° C to +40° C


Aluminium, protective glass on LCD panel

Casing color:


Supplied Accessories:

VAC Adapter, VGA cable, Power cord, User Guide


Copyright Smartec 2006-2017