Site map
About Smartec | Documentation | FAQ | Where to buy
The Art of CCTV
For example, ip camera  
Where to buy


Network STR-0474 4-ch DVR with Full D1 resolution, H.264 and up to 100 ips of recording speed

  • Up to 100 ips recording framerate
  • H.264 video compression
  • Up to 720x576 recording resolution
  • 2 optional HDDs supported
  • Monitor outputs: Main (VGA, BNC), Spot (BNC)
  • Hard disk drive diagnostics (S.M.A.R.T. protocol)
  • RMS Network Software
  • 2 USB ports
  • PTZ control via RS-485
  • Jog-Shuttle
  • 1 audio input
  • USB mouse control

Due to their technical features, the STR-0474 DVRs are ideal for small and mid-sized video surveillance systems with high reliability and video quality requirements. The DVRs allow to perform simultaneous video recording, live viewing, and networking. Recording settings, including resolution, are configurable per individual channel. For ease of operation, the DVRs offer video search by date, time, or event. The DVRs are supplied with IR remote control.

H.264 Support
The DVRs feature the most effective H.264 compression method, providing 80% bit rate reduction compared to M-JPEG, and 40% compared to MPEG-4. Therefore, H.264 ensures maximum recording time without compromising image quality, as well as maximum video transmission rate over the network.

High Recording Rate
The STR-0474 is capable to provide recording of 4 video inputs at 100 ips with 352x288 resolution. For higher quality recording you can select 720x288 or 720x576 resolution (at 720x288, the 4-channel STR-0474 also provides total recording rate of 100 ips).

Video is recorded to SATA HDDs (2 SATA HDDs are supported). Video also can be backed up to external USB drives or DVD/CD via DVD-RW.

PTZ Control
RS-232C and RS-485 interfaces allow to remotely control PTZ cameras from DVR front panel, IR remote control, USB mouse, or STT-CN3R1 remote PTZ controller. PTZ cameras can also be controlled remotely from RMS Software.

Spot Monitor Output
In addition to main monitor output (VGA, BNC), the DVRs are equipped with Spot output, used to connect a monitor for real time alarm video viewing or sequencing. For sensor and alarm device connection, the DVRs offer 4 alarm inputs and 1 alarm output.

Recorded video retention
S.M.A.R.T support allows performing continuous monitoring of hard disk drives used for video storage. If there is a threat of disk drive failure (overheating or damage), the system will warn the operator in good time.

Remote Viewing
The STR-0474 is bundled with RMS software, allowing to view the DVRs' video remotely from any PC on the network. The software features all functions, required to view live or archived video and provide remote setup of the DVRs. In addition to RMS software, applications for mobile devices and tablets on Apple, Android, Windows Mobile and BlackBerry platforms are also available.

Specifications of the Smartec STR-0474 



Video Compression:


Camera Inputs:


Monitor Outputs:

Main: 1 BNC, 1 VGA; Spot: 1 BNC

Audio Inputs/Outputs:

1 IN / 1 OUT

Alarm Inputs/Outputs:

4 IN / 1 OUT

Resolution (recording):

352x288, 720x288, 720x576

Recording Rate:

100 ips (352x288, 720x288), 50 ips(720x576)


Continuous, Schedule, Event (Motion, Sensor), Pre-alarm, Alarm, Panic

HDD Type/Number:

SATA HDD (not supplied), 2 HDDs supported


2 USB Ports (one on the front panel)

PTZ Control:

Front panel buttons; IR remote control; USB mouse

Control Interface:

RS-485, RS-232C


1, 4 screens


Time bar, Calendar (Time/Date), Event, System Log

Playback Modes:

Fast Forward / Rewind (x2, x4, x8, x16, x32), Play, Pause

Network Interface:

10/100 Base-TX Ethernet

Network Protocol:




IR Remote Controller

Supplied with DVR

Operating Temperature:

+5° C ... +40° C, 20 - 80%, noncondensing

Input Voltage:

12 VDC with adapter (supplied)


360 mm (D) x 360 mm (W) x 70 mm (H)


4.3 kg

Copyright Smartec 2006-2017